Activation key is not invalid with pix635 in PEMU, please help me.

[trainingit]

Khi mình chạy giả lập cisco PIX 635:

D:\Pemu>pemu -net nic,macaddr=00:ff:a0:7f:8c:e7 -net tap,ifname=tap0 -net nic,ma
caddr=00:ff:d1:a0:15:42 -net tap,ifname=tap1 -serial telnet::4444,server pix635
-m 128
QEMU waiting for connection on: :4444,server
Values read from pemu.ini:
Serial = 12345678 (305419896)
Image = "pix635"
key = 00000000,00000000,00000000,00000000
bios1 = mybios_d8000
bios2 = bios.bin
bios_ckecksum = yes
BIOS file mybios_d8000 (32768) read 32768 bytes
BIOS file bios.bin (131072) read 131072 bytes
Image file pix635 read 16777216 bytes, @100000
Image signature found at offset 0001b000

Nhưng khi telnet vào 127.0.0.1 4444 thì bị báo lỗi:

################################################## ##############################
#################################
128MB RAM
i82559 Ethernet at irq 11 MAC: 00ff.d1a0.1542
i82559 Ethernet at irq 9 MAC: 00ff.a07f.8ce7
System Flash=E28F128J3 @ 0xfff00000
BIOS Flash=am29f400b @ 0xd8000

-----------------------------------------------------------------------
|| ||
|| ||
|||| ||||
..:||||||:..:||||||:..
c i s c o S y s t e m s
Private Internet eXchange
-----------------------------------------------------------------------
Cisco PIX Firewall

Cisco PIX Firewall Version 6.3(5)
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000

This activation key is not valid.

Rebooting....

=== finish windows command ==========

Press enter key, but nerver reboot.

nhờ mọi người check giúp đây là lỗi gì, mình nghĩ đây là lỗi bị sai serial và key trong file pemu.ini, có ai crack được version 635, hoặc có serial + key của version này mà chạy được thì chỉ cho mình nhé,

:X:X:106::106:

[khungbo33]

Bạn thử xem mấy cái key này nhá, được cái nào thì cho mọi người biết nha :D

PIX 8.02

Activation Key: 0×5236f5a7 0×97def6da 0×732a91f5 0xf5deef57
Activation Key: 0xa94b7db5,0×17d768ea,0×63f6e081,0×6d9fadd5
Activation Key: 0xd7b6b213 0xd9e6a132 0xdfc24d73 0xc2501f1c

[trainingit]

thêm 1 cái serial nữa
serial = 0x301D10D9

Link down PIX 802:
http://rapidshare.com/files/39992741/802.zip

thực ra thử các key này đều báo lỗi invalid key, nhưng khi chạy version 802 này thì mình có thể chạy được bằng default setting. :D

===== Invalid activation key, but run with default settings only ========

INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000

This activation key is not valid, use default settings only

--------------------------------------------------------------------------
. .
| |
||| |||
.|| ||. .|| ||.
.:||| | |||:..:||| | |||:.
C i s c o S y s t e m s
--------------------------------------------------------------------------

Cisco PIX Security Appliance Software Version 8.0(2)

Copyright (c) 1996-2007 by Cisco Systems, Inc.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Type help or '?' for a list of available commands.
pixfirewall> ?

clear Reset functions
enable Turn on privileged commands
exit Exit from the EXEC
help Interactive help for commands
login Log in as a particular user
logout Exit from the EXEC
ping Send echo messages
quit Exit from the EXEC
show Show running system information
traceroute Trace route to destination
pixfirewall>
pixfirewall>
pixfirewall> ena
Password:
pixfirewall#

========= Have fun !!!!! ====================================

:X:X:106::106: