hugo
25-11-2004, 11:53 AM
Hi !
Mình đang tự học CCNA nên chưa hiểu lắm , không biết tạo lôpback để làm gì và sao lại cần tạo các line input từ 1 đến 16 ?
Rất mong được trả lời !
Cám ơn nhiều !
Step 1. Create a loopback interface.
Step 2. Assign an IP address to the loopback interface.
Step 3. Allow Telnet as a transport across asynchronous lines 1 to 16.
Step 4. Create a host table that maps a router's host name (such as R1, R2, and so on) to the asynchronous line it is connected to on the terminal server (such as 2001, 2002, and so on).
Mình đang tự học CCNA nên chưa hiểu lắm , không biết tạo lôpback để làm gì và sao lại cần tạo các line input từ 1 đến 16 ?
Rất mong được trả lời !
Cám ơn nhiều !
Step 1. Create a loopback interface.
Step 2. Assign an IP address to the loopback interface.
Step 3. Allow Telnet as a transport across asynchronous lines 1 to 16.
Step 4. Create a host table that maps a router's host name (such as R1, R2, and so on) to the asynchronous line it is connected to on the terminal server (such as 2001, 2002, and so on).