• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Cấu hình ftth trên GNS 3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cấu hình ftth trên GNS 3

    Nhà em có đường truyền ftth của viettel giờ em đang muốn làm bài lab như sau:

    Mô hình:
    từ ethernet (covert quang ftth ) ---> LAN vật lý ( laptop) ---> cloud ( trên gns3 ) ---> f0/0 (router 2961)
    ( Could tren gns3 đã chọn cổng mạng LAN vật lý của laptop)
    Cấu hình:
    interface FastEthernet0/0
    no ip address
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1

    interface Dialer1
    mtu 1492
    ip address negotiated
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    ppp authentication pap callin
    ppp pap sent-username h004_ftth_giang password 0 3879g

    ip route 0.0.0.0 0.0.0 dialer 1

    Mọi người xem giúp mình với


  • #2
    có thể em cần phải bridge cái card mạng của laptop để router 2961 có thể quay số PPPoE.

    Em thử theo qui trình sau để bridge card mạng trên laptop của em.
    ******** A network bridge is software or hardware that connects two or more networks so that they can communicate. You can create only one network bridge on a computer, but one bridge can handle any number of network connections.
    • Open Network Connections by clicking the Start button , and then clicking Control Panel. In the search box, typeadapter, and then, under Network and Sharing Center, click View network connections.
    • Hold down the Ctrl key and select each network connection that you want to add to the bridge.
    • Right-click one of the selected network connections, and then click Bridge Connections. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.








    Đặng Quang Minh, CCIEx2#11897 (Enterprise Infrastructure, Wireless), DEVNET, CCSI#31417

    Email : dangquangminh@vnpro.org
    https://www.facebook.com/groups/vietprofessional/

    Comment


    • #3
      Cảm ơn anh, em sẽ thử và thông báo kết quả

      Comment

      Working...
      X