• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Xin giup do Juniper ssg 320m

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Xin giup do Juniper ssg 320m

    Have a nice day to you all!
    Mình có 1 con juniper ssg 320m, nó bị lỗi, hiện giờ không thể login bằng console được. Khi login bằng putty serial nó báo CMOS setting wrong ... rồi không cho ấn F1, F2 (ấn vào không thấy động tĩnh gì nên chẳng làm gì được). Bạn nào đã fix được lỗi này xin chỉ giáo. Thanks.
    AMIBIOS(C)2005 American Megatrends, Inc.
    BIOS Date: 06/20/07 10:21:45 Ver: 08.00.12 CPU : Intel(R) Celeron(R) CPU 2.00GHz Speed : 2.00 GHz
    DDR Frequency 266 Mhz, Dual-Channel, Tiled Mode Initializing USB Controllers .. Done.
    1024MB OK
    Auto-Detecting Pri Master..IDE Hard Disk Pri Master: 512MB CKS YUAN1026
    Ultra DMA Mode-4
    Auto-detecting USB Mass Storage Devices ..
    00 USB mass storage devices found and configured.
    CMOS Settings Wrong
    CMOS Date/Time Not Set
    Press F1 to Run SETUP
    Press F2 to load default values and continue

  • #2
    cổng console luôn luôn vào được. Em thử kết nối lại một lần nữa qua cổng console, lần lượt thử các tốc độ từ thấp nhất 2400 đến cao nhất.
    Đặng Quang Minh, CCIEx2#11897 (Enterprise Infrastructure, Wireless), DEVNET, CCSI#31417

    Email : dangquangminh@vnpro.org
    https://www.facebook.com/groups/vietprofessional/

    Comment

    Working...
    X